How to prevent Electric fire

1)   Check the condition of your wiring. This should be done when you move into a new home and then once every 10 years. It’s the landlord’s responsibility if you rent your home. Ask to see a copy of the certificate or report confirming that the electrics meet the standards (Requirements for Electrical Installations)

2) Check your sockets regularly. If you see burn marks or they feel hot, get a registered electrician to check them.
3) Turn off any electrical equipment you are not using. This especially important at night, there is a chance of fire that can spread quickly while you sleep.
4) Regularly check flexible cables on your appliances. Look for signs of fraying, general wear and tear, or a loose plug on kettles on similar appliances. Do this before you plug anything in.
5) Careful when using hand-held electrical equipment. Make sure you switch off and unplug this equipment when you have finished with it. This is important with items that get hot, such as hairdryers or curling tongs, as they may come into contact with materials that can catch fire (like curtains).
6) Check the current rating of your electrical adaptor. Before you plug appliances in, make sure that the total current used in the appliance does not exceed the adaptor’s rating.
7) Don’t overload any adaptor or socket – especially with appliances that have a high electrical current such as kettles, irons or heaters. It’s safer to have extra sockets installed if needed.
8) Don’t put electric heaters near curtains or furniture – or dry clothes on them.
9) Don’t cover the air vents on storage heaters or fan heaters.
10) Don’t trail flexible cables under carpets or rugs.
11) Don’t exceed the wattage of the light fitting or lampshade with the bulb you use.
12) Don’t cover the air vents on storage heaters or fan heaters.
13) Don’t store combustible materials (clothes, papers, cleaning materials etc.) close to your service head (cut-out fuse), electricity meter or fuse box.

Comments

Post a Comment

Popular posts from this blog

Automatic Irrigation system using 8051

Image
 INTRODUCTION https://www.youtube.com/watch?v=HPO6GTjQNTs In a country like India, the agriculture plays the important role in the economy and development of the country. At the present era, the farmers have been using irrigation technique in India through the manual control in which the farmers irrigate the land at the regular intervals. This process sometimes consumes more water or sometimes the water reaches late due to which the crops get dried . There is a need in the residential/commercial irrigation industry for an irrigation controller that responds to soil moisture sensors in individual zones as a way of conserving water. An ideal controller should be "user friendly", i.e., easy to program and requiring a minimum number of keys or push-buttons to operate the controller. It should also allow irrigation to take place in zones where watering is required, while by passing zones where adequate soil moisture is indicated- To add flexibility, it should be possib...
Read more

Transformer

Image
            A transformer is a magnetically coupled device in which magnetic field produced by time-varying current induction voltage in another. An electric transformer changes ac electric power at one voltage to another. The transformer two coils, these are electrically separated but linked through a common magnetic current circuit. AC current in one coil produce a flux that links with other winding and induces voltage in that. STANDARD TRANSFORMER ACCESSORIES 1)       Thermometer Pockets This pocket is provided to measure temperature of the top oil in tank with mercury in glass type thermometer. It is essential to fill the pocket with transformer oil before inserting the thermometer, to have uniform and correct reading   2)    Buchhol's Relay  ...
Read more

CONDUCTORS

Image
Conductors are materials with electrons are loosely bound to their atoms or materials that permit free motion of a large number of electrons. Atoms with only one valance electron such as copper, silver, gold are examples of good conductors. Most of the metals are good conductors Properties of electrical conductors             In equilibrium condition the conductors exhibit the following properties a)       Resistance Conductors are those substances which offer such a small resistance b)       Inductance When a conductor is used as ac supply a magnetic flux is produced, which consist of two parts. One is internal flux and other is external flux. The internal flux is very low as compare to external flux. Due to this flux linkage to the conductor itself an inductance is come into picture. This inductance results in extra voltage drop in conductors. More over this induct...
Read more